www.cressington.com/product_108.html
The Cressington 108auto sputter coater offers the choice of manual or automatic operation. The specification also includes automatic vent (with a choice of vent ... |
www.tedpella.com/cressing_html/intro.htm
cressington sputter coaters, carbon coaters and vacuum evaporator for electron microscopy applications.
|
www.clean.cise.columbia.edu/equipment/121-cressington-108-manual-sputter-coater
General Information The 108 Manual Sputter Coater is an ideal system for sample coating with Au of non-conducting samples for standard SEM imaging.
|
www.cressington.com/product_208hr.html
Picture of 208HR with RPT stage. Illustrated:-. sputter coater 208HR with:- rotary- planetary-tilt stage; thickness controller MTM-20 ...
|
www.bioimaging.northwestern.edu/sp_csc.html
The Cressington Sputter Coater is used to apply a thin layer (¡Ý1 nm) of metals or alloys to various specimens. Coating materials available: gold; platinum: ...
|
www.tedpella.com/cressing_html/crs208hr.htm
The 208HR High Resolution Sputter Coaters from Cressington offer real solutions to the problems encountered when coating difficult samples for FESEM ...
|
sbs.wsu.edu/fmic/protocol/hires_sputter.html
Cressington Sputter Coater. Do not operate this equipment until you have been trained by FMIC staff. 1. Move shutter to cover target then Carefully tilt lid back. 2.
|
caf.ua.edu/wp-content/uploads/docs/Cressington 208 HR sputter coater.ppt
Cressington 208 HR Sputter coater. 08/18/06 mgbersch. Overview. 08/18/06 mgbersch. Argon On. Check to see if the Argon tank (bottle) main valve is on.
|
www.vortexcontrolsystems.com/INVENTORY/sputtering/Cressington 208 HR Sputter Coater/Cressington 208 HR Sputter Coater.htm
Cressington 208 HR Sputter Coater. Click on any item to view an enlarged image . Cressington 208 HR Sputter Coater complete with manual..............$12,800.00.
|
micron.ucr.edu/public/OPERATION-108auto.pdf
OPERATION of SPUTTER COATER Cressington 108 AUTO. 1. Place the specimen in the chamber and adjust height (we recommend about 1.5 inch or 4 cm) ... |
